Varathane Bar & Table Finish Interior (Epoxy)

Varathane Bar & Table Finish Interior (Epoxy) is a Two-component epoxy bar top wood finish available at Windsor Plywood. Crystal clear, extremely hard two-component epoxy coating for bar tops, tables, and surfaces requiring maximum protection against spills and abrasion.

Features

• Provides durable protection for bar tops, restaurant tables, and high-wear flat surfaces surfaces
• Non-yellowing formula preserves the natural colour of the wood (water-based) or adds warm amber tone (oil-based)
• Resists water, stains, and household chemicals
• Self-leveling for a smooth, even finish
• Clean up with mineral spirits after application

Specifications

Common Uses

Varathane Bar & Table Finish Interior (Epoxy) is used to protect and enhance bar tops, restaurant tables, and high-wear flat surfaces wood surfaces in residential and light commercial applications. Apply over bare, stained, or previously finished wood surfaces that have been properly prepared and sanded.

Pro Tips

• Mix Part A and Part B in the correct ratio -- incorrect mixing causes incomplete curing and a soft, tacky surface.
• Apply in a warm room above 18 degrees C -- epoxy cures poorly in cold conditions.
• Use a propane torch or heat gun briefly over the surface immediately after pouring to pop surface bubbles.

Frequently Asked Questions

How thick can I pour Bar & Table Finish in one application?
Apply in layers no thicker than approximately 1/8" per pour. Thicker pours generate excess heat during curing that can cause cracking, yellowing, or distortion.

Can Bar & Table Finish be used outdoors?
No. Epoxy finishes yellow significantly under UV exposure and are not suitable for exterior applications.