Pine Finishing Lumber is one of the most accessible and versatile softwoods available for interior finishing, millwork, and light construction. Kiln-dried and surfaced 4 sides, it arrives ready to cut, shape, paint, or stain without additional preparation. The straight, even grain takes paint uniformly and machines cleanly -- making it a practical, cost-effective choice for trim, casing, shelving, boxes, furniture components, and interior panelling applications.
Features
- Kiln-dried and surfaced 4 sides (S4S) -- ready to work on arrival
- Straight, even grain with medium texture -- takes paint, stain, and clear finishes well
- Very easy workability -- cuts, routes, glues, and nails cleanly with standard tools
- Cost-effective softwood finishing option -- widely available across Windsor Plywood locations
- Available in multiple dimensions from 2x6 through 4x4 -- suitable from trim details through structural components
- Suitable for interior trim, shelving, furniture components, carving, and light construction
Specifications
| Species |
Pine |
| Grain / Texture |
Straight with an even, medium texture |
| Drying Method |
Kiln-dried (KD) |
| Surfacing |
Surfaced 4 sides (S4S) |
| Sizes Available |
2"x6", 2"x8", 2"x10", 4"x4" -- confirm current stock with your local branch |
| Workability |
Very easy -- glues, cuts, routes, and finishes well |
| Availability |
In-store -- some sizes may be special order. Confirm stock with your local Windsor Plywood location. |
Common Uses
Pine Finishing Lumber is used for interior window and door casing, baseboard, shelving units, furniture frames and components, workbench tops, storage boxes and crates, carving blanks, and light construction framing. The 4x4 dimension is commonly used for post and rail applications, small deck posts, and structural interior supports where a finished appearance is required.
Pairs Well With
For a primed, paint-ready shiplap panelling application using the same pine base material, see Woodtone Finger Joint Primed Shiplap. For alternative softwood finishing lumber options, Hemlock Finishing Lumber and Cedar Finishing Lumber are available at Windsor Plywood. For a similar pine option in dimensional lumber, see Western White Pine Lumber.
Pro Tips
- Pine is a softwood and dents more easily than hardwood alternatives -- for high-contact surfaces such as tabletops and workbench tops, apply at least two coats of a durable finish such as polyurethane or conversion varnish for adequate protection.
- For painted applications, apply a shellac-based primer or high-build primer before topcoating. Pine knots can bleed through water-based and oil-based primers over time -- shellac-based primer seals knots permanently and prevents bleed-through.
- Acclimate pine lumber in the installation space for 48 hours before cutting and installing trim. Pine moves noticeably with humidity changes -- installing without acclimation can result in gaps at joints after the wood adjusts.
Frequently Asked Questions
What is the difference between Pine Finishing Lumber and construction pine?
Pine Finishing Lumber is kiln-dried, surfaced 4 sides, and graded for appearance -- it arrives with a smooth, consistent surface suitable for paint, stain, or clear finish. Construction pine is typically green or partially dried, rough-sawn or surfaced 2 sides, and graded for structural strength rather than appearance. Finishing lumber costs more per board foot but requires no additional preparation before use.
Can pine finishing lumber be used for outdoor applications?
Standard pine finishing lumber is not rated for exterior or ground-contact use. For outdoor trim and finishing applications, cedar or pressure-treated lumber is the appropriate choice. For covered outdoor spaces where the wood is protected from direct rain but exposed to humidity, pine can be used with a thorough exterior primer and topcoat, but longevity will be shorter than a naturally durable species.
Does pine need to be primed before painting?
Yes, and the primer choice matters. Pine knots contain resin that bleeds through water-based and standard oil-based primers over time, causing yellow stains on the painted surface. Use a shellac-based primer such as Zinsser BIN to seal knots permanently before applying your topcoat. This is standard practice for all knotty pine painted applications.
What sizes are available?
Current stock includes 2"x6", 2"x8", 2"x10", and 4"x4". Availability varies by location and some sizes may be special order. Confirm current stock with your local Windsor Plywood branch before planning your project.
Find Your Store
